Ring and Shoe Size Converter: US, UK, EU, Japan and mm
Pick a ring size in one system, or enter an inner diameter or circumference in millimeters, and read the matching US, UK, EU and Japanese sizes. A second tab converts shoe sizes by foot length, and the ring tab has a printable sizer.
Convert Sizes
Enter Ring Size
Quick Select
Inner diameter:
17.35 mm
Circumference: 54.4 mm
Conversion Results
7
N
54
14
17.35
54.4
Printable Ring Sizer
Print at 100% scale (no fit-to-page). Place your ring over each circle - the one that fits inside the circle is your size.
Runs in your browser: your files and text are not uploaded. Free, no account needed.
Last updated: · Reviewed by the QuickTooly Team
Size tables and measuring
What the ring table is based on
Every system is a label for the inside size of the ring. The table in the tool has 20 rows: US 3 to 12 in half sizes, then 13 (there is no 12.5). Each row gives:
- US / Canada: numeric sizes 3 to 13.
- UK / Australia: letters F to Z (no Y row).
- EU: the inner circumference in millimeters, rounded to a whole number (ISO 8653 style), 44 to 70.
- Japan: sizes 3 to 27. Japanese numbers are not evenly spaced against US sizes, so some numbers are skipped.
- Inner diameter and circumference: 14.07 to 22.22 mm and 44.2 to 69.8 mm. Circumference is roughly diameter × π; the stored values are rounded and can be off by 0.1 mm.
Jewelers' charts do not all agree to the last decimal, so treat a size on the boundary between two rows as a reason to try both.
Measuring your finger or a ring
- From a ring that fits: measure the inside diameter across the widest point, in millimeters, and choose Inner Diameter.
- From your finger: wrap a thin strip of paper around the base of the finger, mark where it overlaps, and measure the length. Choose Inner Circumference.
- Timing: fingers are larger when warm and later in the day; measure more than once. A wide band needs a slightly larger size than a thin one.
Worked example: a paper strip measures 57 mm. The nearest circumference in the table is 57.1 mm, which is US 8, UK P, EU 57, Japan 16, inner diameter 18.19 mm. As a check, 57 ÷ π = 18.14 mm, and the nearest diameter is also the US 8 row.
The millimeter input always snaps to the nearest row, even far outside the table: 25 mm diameter still shows US 13. If your measurement is below 14 mm or above 22.3 mm, the result is not a real match.
Printing the ring sizer
- Print at 100% scale. Turn off "fit to page" or "shrink to fit". The circles are drawn at 3.7795 CSS pixels per millimeter (96 pixels per inch), which prints at true size only without scaling.
- Check with a ruler before you use it. Each circle is labeled with its diameter; measure one, for example US 8 at 18.19 mm. If it is off, the whole sheet is off.
- Mind the width. The sheet is about 188 mm wide (5 columns of circles for US 4 to 13). With wide page margins the browser may shrink it; reduce the margins or print in landscape.
- How to read it: lay a ring that fits on the circles. The matching circle is the one whose line sits just inside the ring's inner edge.
Shoe sizes
The shoe tab maps foot length from 22 to 31.5 cm to US Men's, US Women's, UK, EU and Japanese sizes. In this table US Women's is US Men's + 1.5, and the Japanese size equals the foot length in centimeters. Only sizes in the table can be selected, so in-between sizes such as EU 39.5 are not available. Brands size their lasts differently, so use the result as a starting point.
Ring and shoe size questions
What is a US size 7 ring in mm?
In the table, US 7 is 17.35 mm inner diameter and 54.4 mm inner circumference. That is UK N, EU 54 and Japan 14.
Why is the EU ring size close to the circumference?
European sizes are the inner circumference in millimeters rounded to a whole number. EU 57 is a ring of about 57 mm around the inside.
My printed circles are the wrong size. Why?
The page was scaled when printed. Print again at 100% with fit-to-page off, then measure a labeled circle with a ruler before you use the sheet.
Does the ring size change between US and Canada or UK and Australia?
No. Canada uses the US numbers and Australia uses the UK letters, which is why the tool groups them.
Related tools
- Unit Converter: if you measured your finger in inches and need millimeters.
- Weight Converter: for carats and troy ounces when you also check the weight of a stone or a gold band.